SCX10 II Deadbolt 4WD RTR AX90066

SCX10 II Deadbolt 4WD RTR AX90066

Your Price: $299.99
In Stock.
Part Number:11955

**Additional Technical Info Will Be Added When it Becomes Available.**

FEATURES
Chassis: Scale steel C-channel side rails with adjustable body mount
adjustable bumper mounts with swaybar mounting points  mounting
points for optional 2-speed and servo winch  adjustable chassis
mounted servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
driveshafts with updated design with a larger diameter crosspin
(2x11mm) with an M4 screw shaft (2mm hex drive) for added strength
center splined slider floats between each end with added material
that reduces flex and fatigue
Transmission: AX10 three gear layout  metal motor plate  adjustable
ratio for high speed or competition level crawling speed  20T
metal drive gear  plastic idler and lower gear  optional all metal
gear set is available  AX31585  better mounting points at base of
transmission-no more stripped screws
Slipper Clutch: Dual pad design for added surface area  32P gear
pitch for high-torque applications
Motor: 35 turn  brush equipped  water resistant  integrated cooling
fan
Radio: Tactic TTX200 2-channel transmitter with TR325 3-ch Receiver
Steering Servo: Tactic TSX45 metal gear  water resistant  151oz/in
torque rating  dual ball bearings
Receiver Box: Waterproof with separate silicone seals for antenna
servo wires and gasket for receiver box cover  receiver box
located on side plates for easy access and low center of gravity
ESC: AE-5 waterproof  switchable between LiPo or NiMH
operation with a simple jumper-jumper 1 provides simple plug and
play choice between LiPo or NiMH  jumper 2 switches Drag Brake
settings  waterproof design with Star plug battery connector
Spur Gear: 56T 32-pitch  plastic construction
Pinion Gear 15T 32-pitch  steel construction
Battery Tray: Easy access front mount  adjustable  accomodates
batteries up to 1.2 x 1.7 x 5.8' (32x44x147mm) 3S  5000mAh
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears  optimized gear
ratio for reduced torque twist  optional gearing choices  one-
piece axle housing  increased clearance  larger load rated
bearings for durability  8° kingpin axle eliminates tire scrub
single piece axle housing  one-piece all metal locker  10°
increment adjustments for knuckle carriers and straight axle
adapters  optimized gear ratio; 3.75 compared to 2.92 previously
for less torque twist
Body: Olive drab painted
Wheels: Method Hole wheels  molded composite 1.02' (26mm) wide
2.12' (53.9mm) construction  black in color  12mm hex
Tires: 1.9' Nitto Trail Grappler M/T  S30 compound with large blocks
for excellent bite in all terrain 4.7' (119.4mm) 1.9' (48.2mm)
wide
Shocks: Coil over  oil filled  steel springs  white in color
multiple mounting positions
Suspension: Optimized suspension geometry with integrated mounts
upper and lower aluminum links  4-link design reduces axle steer
and torque twist  and guards against suspension wrap-up in high-
power applications  all steel links
Steering: Proper CMS geometry using 3-link setup with panhard bar
45° steering angle
Bumpers:
Warranty: One year bumper to bumper limited. Axial's warranty center
Hobby Services will repair or replace any incorrectly made part.
Proof of purchase is required for Axial to honor any warranty
claim. Axial reserves the right to change or modify this warranty
without notice. This warranty does not cover damages due to normal
wear and tear  users' failure to perform routine maintenance  user
error of assembly or installation  modifications  misuse  crash
damage  or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the
warranty and prevent support and service.
Repair or replacement of the product by Hobby Services is the sole
and exclusive remedy for any loss or damages.


INCLUDES
RTR SCX10 II Deadbolt 4WD with Oil-Filled Shocks  Wheels  Tires
Painted Body  Radio  ESC  Motor  Decals  Waterproof Receiver Box
LED Lights and Instruction Manual


REQUIREMENTS
Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with selected battery
Building and track equipment


SPECIFICATIONS
Vehicle-
Length: 18.1' (460mm)
Width: 8.8' (225mm)
Height: 9.0' (229mm)
Wheelbase: 12.0' (305mm)  optional link kit allows wheelbase
adjustment to either a 11.4' 12.0' or 12.3' wheelbase
Ground Clearance: 2.7' (68mm)
Weight: 4.65lbs (2.1kg) approximately  with electronics
Optimized Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 42.00  stock
(33.69-54.15 with different spur/pinion gear combinations  extra
spur and pinion gears must be purchased separately)
Adjustable Battery Tray Dimensions: 5.75 x 1.2' (147 x 32mm)
Body-
Length:
Width:
Height:

Related Items

Recently Viewed Items