1/8 Talion 6S 4WD brushless


Fully equipped and ready to bash!

Nothing can prepare you for the 70+ mph speeds you'll experience with the ultra-sleek, low-CG TALION 6S BLX! The redesigned front end is lower and sleeker, dramatically reducing drag while boosting top-end speeds. The updated suspension is optimized for on-road speed runs, yet it's equally at home going off-road. Electronics have been moved closer to the back of the vehicle for superior stability. When it comes to blistering speeds out of the box, there's nothing else like the TALION 6S BLX

  • Aggressively designed low-profile body.
  • Low-profile dBoots Katar tires designed for ultimate bite.
  • Newly designed multi-element high-downforce wing.
  • New tire and wheel package is optimized for on-road speed runs as well as off-roading.
  • Lower shock towers allow low and sleek body shell for superior aerodynamics.
  • All-new shocks with 4 mm shafts complement the shock towers and boost durability.
    • Shares the battery tray, battery box and adjustable body mounts from the OUTCAST 6S.
    • New, larger radio box.
    • New low-profile wing mount.
    • Stronger front hubs.
    • Stiffer servo mount.
    • Stronger bulkheads.
    • Stronger front and rear chassis braces.
    • Two XT90 battery connectors.
ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - Secure battery mount system.

ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - Secure battery mount system.
Secure battery mount system holds your batteries in TIGHT.Two hook-and-loop straps, fitted perpendicular to each other, provide a secure fit for your batteries. Secure fitting means batteries can be safely mounted side-by-side or one on top of the other.
The battery tray incorporates a balance plug stowage area. Battery balance plugs are held in place with a rubber strap, keeping them away from rotating parts.
Wire routing clips fit to the long hook-and-loop strap and keep battery to ESC wires away from rotating parts of the model. The front upper brace of the battery adjusts itself to the height of your battery packs.
ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - radio box
The TALION 6S BLX features an all-new radio box design. ESC and servo wires now pass through a foam seal that slides into the side of the radio box, meaning that these wires stay in place when the lid is removed.
There is a continuous rubber seal between the radio box base and the lid, protecting the receiver from the elements.
The radio box also has increased internal volume, allowing more room for fitment of aftermarket receivers.
ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - Shocks
Soaking up a wide range of surfaces is made easy with the included red anodized adjustable shocks. Factory set to handle everything from fast speed runs to snow and mud chucking, no matter where you choose to bash, these high-quality units will keep you stable and in-control.The shocks are slightly shorter than the previous model and have been layed down, allowing the sleek body to be mounted as low as possible to optimize the aerodynamics.
ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - waterproof ESC
The included BLX185 150A waterproof ESC provides consistent power control and is 6S LiPo ready.
Fitted with super-reliable XT90 connectors and sporting a built-in cooling fan for reduced heat during intense driving action, the BLX185 ESC has over-voltage protection, and a two-stage LiPo cut off for added cell management.
The fitted 10AWG high-quality wires and 6V BEC unit are combined with a three mode throttle profile (FWD/REVERSE/BRAKE) to provide the ultimate driving experience.
Recommended battery specification: 5000mAh - 35C minimum - per battery pack
ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - BLX 2050kV brushless motor
The BLX 2050kV brushless motor provides speed and torque and is perfectly balanced for use with our BLX185 ESC unit.
Gold bullet connectors provide fast and easy wire removal when you need to clean your vehicle.
The aluminum motor can provides increased heat dissipation from the finned body section.
A dual motor shaft flat section provides a safe and secure pinion gear fitting.

ARRMA® 1/8 TALION 6S BLX Brushless 4WD RTR - Servo
The ADS-15M steering servo benefits from metal gears and is fully waterproof.
To provide fast and consistent steering response, the ADS-15M has 208oz-inch (15kg-cm) of torque at 7.2v.
At 1.6 x 0.8 x 1.5' (41 x 20 x 38mm) in size, this high-power steering servo is compact and highly capable.

Featured Products
Products (Total Items: 131 )
Sort by:
More results: 1 2 3 4 5 6 7 ...11 Next Page View All
Aluminum HD Front Shock Tower KRATON/OUTCAST
In Stock.
Aluminum Steering Servo for Arrma AON24M02
In Stock.
LiPo 5450 6S 22.2v Battery Pack XT90
In Stock.
In Stock.
Gearbox Case Set HD 6S AR310854
In Stock.
Pinion Gear 13T Mod 1 5mm AR310474
In Stock.
Pinion Gear 15T Mod 1 5mm AR310476
In Stock.
Pinion Gear 16T Mod1 5mm TYPHON AR310477
In Stock.
More results: 1 2 3 4 5 6 7 ...11 Next Page View All