AX90025 1/10 Yeti 4WD Kit

Product_ax90025_yeti_kit_950x450

Now in kit form, the Yeti™ is a skillfully engineered rock racing vehicle with a solid rear axle and independent front suspension. Its distinct aesthetic and technical elements were inspired by full-size desert trucks. Its strategically engineered design supplies bashing stamina while delivering a high level of technical rock racing abilities without compromise in either category. This kit version will accept standard 1/10th scale brushed and brushless 4-pole systems and most major stick pack batteries. Precision machined aluminum shocks are standard equipment and deliver smooth suspension movement for consistent handling.
    

    
    

Chassis_front_01_950

   

Yeti_transmission_625x300


HI-LO TRANSMISSION
The Axial Hi-Lo transmission was specifically designed for the Yeti chassis. With all metal internal gears, this full ball bearing transmission has the strength to endure the harshest rock racing environment and brushless power. The factory gearbox comes as a single speed with the high gear installed for high speed fun. The integrated motor mount features a wide range of movement for endless gearing options. Optional two-speed transmission component sold separately.

Ax90025_10_300x200

 

M4 THREADED ALUMINUM TURNBUCKLES
Hard anodized aluminum M4 threaded turnbuckles on the independent front suspension for added tuning.

Ax90025_07_470x289

ICON ALUMINUM SHOCKS
These featured Icon Vehicle Dynamics aluminum shocks feature precision machined pistons which offer smooth performance throughout the range of travel. Made to tight tolerances, these aluminum shocks feature clear coated polished aluminum bodies and are threaded for quick ride height adjustments and pre-load tuning ability.

Ax90025_15_300x200

WB8 HD WILDBOAR™ REAR DRIVESHAFT
The WB8 HD rear driveshaft features an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.

• 3-piece driveshaft with strengthened slider-floater tube.
• Increased surface at the connection between the ball joints and output shaft tubes.
• 2x11mm cross pin adds 25% more surface area providing more strength for the ball joint.
• Captured cross pin design eliminates older set screw design for more durability and easy maintenance.

Ax90025_12_300x200

AR60 OCP-AXLE™
The AR60 OCP-Axle™ is constructed from high strength composite material which has a low flex rate but is not as brittle as standard glass filled nylon. The combination of our axles and a true 4-link suspension gives you optimal performance for any terrain with the look of a real 1:1 vehicle.

• Off-center pumpkin design
• Axle tubes are reinforced with a boxed-in axle truss
• High strength composite material

Ax90025_06_470x289

2.2 METHOD IFD™ BEADLOCK WHEELS
Based off the Method MR101s these officially licensed wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith™, AX10™ or SCX10™. Our IFD™ (Interchangeable Face Design) wheel system makes it easy to dress up with a new look.

Ax90025_18_300x200


FULLY ADJUSTABLE BATTERY TRAY
The integrated battery tray can be easily accessed by removing the two front body pins and pivoting up the entire body. Gain full access to the battery trap door by removing the remaining body pin. The battery tray is fully height adjustable with four button head screws, making room for most standard sized 2S and 3S LiPo battery packs.

Yeti_transmission_cover_300x300

PROTECTIVE TRANSMISSION COVER
Helps keep dirt and debris out of your pinion and spur gear for a quiet and efficient drivetrain, and it also prevents any loose wires from getting chewed up!


 
    



Featured Products
Yeti Rock Racer 4WD Kit AX90025
$340.00
In Stock. Free Shipping.
 
 
Products (Total Items: 249 )
Sort by:
More results: 1 2 3 4 5 6 7 ...21 Next Page View All
SCX 10 II Clamping 25t Servo Horn VPS02410
$13.99
Out of Stock.
Axial Clamping 25t Servo Horn - 20mm VPS02412
$13.99
In Stock.
2x6mm Cap Head Black Oxide AXA013
$1.53
In Stock.
3x8mm Screw Hex Tap Button Head Black AXA434
$1.55
In Stock.
Differential Gear Set Yeti EXO AX30390
$7.50
In Stock.
3x10mm Hex Tap Button Head Black AXA435
$3.00
In Stock.
X-Duty Rear C-Drive Kit Yeti 14390
$45.00
In Stock.
King Off-Road Dual Spring Shock 120mm Z-D0067
$39.99
In Stock.
M3 Bent Medium Aluminum Rod Ends Black Z-S1651
$34.99
In Stock.
2 Speed Gear Set Steel Yeti YET1000T
$70.00
Out of Stock.
More results: 1 2 3 4 5 6 7 ...21 Next Page View All