This is the C-7 Nano High Frequency Electronic Speed Control w/BEC.For very small indoor Park and Backyard Flyers with 280-size orsmaller Brushed motors requiring 7A or less.
FEATURESExtremely compact size to minimize weight and simplify installationSet battery type with included jumpersUses 'Safe-Start' system to prevent accidental motor starts bydisabling the motor circuitry until the throttle stick is moved tofull throttle then to the OFF positionFactory installed motor radio and battery connectorsFully proportional forward only (no brake)Battery Eliminator Circuitry provides sufficient voltage for thereceiver and two to three micro servos. The motor battery powersthe receiver and servos then when voltage is reduced to theappropriate voltage the Low Voltage cut-off circuitry stops themotor while continuing to supply power to the receiver and servosHigh frequency to optimize battery run-time and cool operationBright Blue LED and audible tones for easy set-upVery smooth throttle response180 day limited warranty
INCLUDESOne C-7 Nano Electronic Speed Control with polarized microconnector for battery 2mm gold plated female bullet motorconnectors and Universal receiver connector and separate pre-assembled leads with male and female 2-pin connectorsOne instruction sheet
REQUIREMENTSAttaching to motor and setting up speed controlBattery packPlug Universal plug into the throttle channel on the receiver
SPECIFICATIONSLength: .66' (17mm)Height: .28' (7mm)Width: .43' (11mm)Weight: .20oz (5.5g) with wiresInput: 6-8 NiCd/NiMH cells; 2-3 LiPo cellsMax Rated Current: 7A continuousBEC Voltage: 5V/1ALow Voltage Cutoff: .80V per cell for NiCd/NiMH2.75V per cell for LiPoConnectors: Receiver lead- UniversalBattery lead- 2R micro connectorMotor Connector- 2mm gold plated female bullet connectorsSwitching Frequency: 2.5kHzMotor Size: 280 or less Brushed only