Lipo Battery x4 pro H109S-17

Lipo Battery x4 pro H109S-17

Your Price: $80.00
Out of Stock.
Part Number:4411

This is the 11.1V 7000mAh LiPo Battery                     
for the Hubsan X4 Pro FPV Quadcopter with Touch Screen Transceiver  HBNE0010 
    and the X4 Pro FPV Quadcopter with Parachute Recovery System  HBNE0020.   
FEATURES: Shrink wrapped cells                                                
INCLUDES: 11.1V 7000mAh LiPo Battery with Balance Connector and XT60 Discharge
REQUIRES: Battery charger such as the Hubsan Balancing Charger  HBNE3029      
          LiPo charging bag                                                   
SPECS:    Capacity: 7000mAh                                                   
          Weight: 13.4oz (380g)                                               
          Dimensions: 4.3 x 1.3 x 1.7' (109 x 33 x 44mm)                      
          Watt Hours: 77.7                                                    
          Discharge Rate: 25C                                                 
          Discharge Plug: XT60                                                
COMMENTS: ALWAYS use a LiPo-approved Charger                                  
          ALWAYS use a LiPo Cell Balancer or Charger with Cell Balancer       
          NEVER Charge over 4.20V per cell                                    
          NEVER Charge at currents greater than 3C                            
          NEVER Trickle Charge                                                
          NEVER allow to Discharge below 2.5V per cell                        
          NEVER disassemble or modify pack wiring in any way or puncture cells
          NEVER place on combustible materials or leave unattended during     
          ALWAYS Charge in a fireproof location                               
          ALWAYS set charger's output volts to match battery volts            


Related Items

Recently Viewed Items