This is the 1/10 scale Electric Powered Radio Controlled RC10B6D Team Buggy Kit from Team Associated.
The differences between the RC10B6 and RC10B6D are as follows; The RC10B6 is configured for high to very-high traction surfaces. The RC10B6D is configured for low to high traction surfaces. RC10B6 RC10B6D Laydown Transmssion Upright Transmission Gear Differential Ball Differential Gull Wing Front Suspension Arms Flat Front Suspension Arms Wide Front Shock Tower Narrow Front Shock Tower
Chassis: Hard anodized aluminum 0.098' (2.5mm) thick pocketed chassis optional weights (not included) allow weight bias tuning repositioned A plate provides maximum front end clearance Drive: Two wheel drive with heavy duty rear axle aluminum front axle and rear hexes for less rotating mass Transmission: Standup 3-gear offers more rearward weight for better rear traction Differential: Ball type for more rear traction and better stability Suspension: Flat front arms for more responsive steering and quicker release out of corners updated ball cups and turnbuckles for precise adjustment and durability Motor Mount: central positioning for optimum side-to-side balance Shocks: V2 12mm Big Bore aluminum body with 3mm TiN coated shafts and low friction X-rings for improved smoothness Factory Team aluminum shock bushings rear shocks may be mounted on front or rear of rear arms Ball Bearings: Full set Factory Team upgraded Steering: One-piece blocks with bolt-on Ackermann plate Ackermann refers to the effect of the inner front wheel rotating faster than the outer front wheel during turns reverse bell-crank steering rack design offers more room for electronics Body: Clear buggy screw-mounted wing by JConcepts Battery Hold-Down Strap: Adjustable to allow weight bias tuning
RC10B6D Team Buggy Kit with Body Rear Wing Shocks Decals and Instruction Manual
Radio: 2-channel with high-torque steering servo Motor: 540 size ESC: Battery: 7.4V LiPo or 6.6V LiFe saddle shorty or square pack Battery Charger: Wheels: 1/10 scale buggy Tires: 1/10 scale buggy Pinion Gear: 48P Paint building and track equipment
Vehicle; Length Width and Weight will vary depending on equipment used Wheelbase: 11-11.1' (280-282mm) Body; Length: 11.4' (289mm) Width: 5' (127mm) Height: 2.8' (71mm)