SCX10 II '17 Jeep Wrangler Unlimited CRC RTR

SCX10 II '17 Jeep Wrangler Unlimited CRC RTR

Your Price: $409.99
Out of Stock.
Part Number:11341

This is the Electric Powered  Radio Controlled  1/10 scale
Ready to Run SCX10 II 2017 Jeep Wrangler Unlimited CRC 4WD.

Chassis: Scale steel C-channel side rails with adjustable body mount
adjustable bumper mounts with swaybar mounting points  mounting
points for optional 2-speed and servo winch  adjustable chassis
mounted servo system
Drive: Full time 4WD locked drivetrain with WB8 HD Wild Boar
driveshafts  UVJ style front driveshafts for up to 45° of steering
angle  full ball bearing drivetrain
Transmission: AX10 three gear layout  metal motor plate  adjustable
ratio for high speed or competition level crawling speed
Slipper Clutch: Dual pad design for added surface area  32P gear
pitch for high-torque applications
Motor: 35 turn  brush equipped  water resistant  integrated cooling
Radio: Tactic TTX300 3-channel SLT radio with TR325 Receiver
programmable 3rd channel for operating two speed transmission
winches or lights
Steering Servo: Tactic TSX45 metal gear  water resistant  151oz/in
torque rating  dual ball bearings
ESC: AE-5L waterproof  switchable between LiPo or NiMH
operation with a simple jumper  Star plug battery connector
built-in LED light controller (NOTE LED leads are not compatible
with old Axial LED light strings  or third party LED light strings
Spur Gear: 56T 32-pitch  plastic construction
Pinion Gear 15T 32-pitch  steel construction
LED Lights: Four white for head lights and turn signal markers  and
two red lights for tail lights
Battery Tray: Easy access front mount  accomodates batteries up to
1.2 x 1.7 x 5.8' (32x44x147mm) 3S  5000mAh
Front and Rear Axles: Hardened steel
AR44 Hi-Pinion Axle: Hypoid cut CNC metal gears  optimized gear
ratio for reduced torque twist  optional gearing choices  one-
piece axle housing  increased clearance  larger load rated
bearings for durability  8° kingpin axle eliminates tire scrub
single piece axle housing  one-piece all metal locker  10°
increment adjustments for knuckle carriers and straight axle
adapters  optimized gear ratio; 3.75 compared to 2.92 previously
for less torque twist
Body: Painted 2017 Jeep Wrangler Unlimited CRC
Wheels: 1.9' KMC XD 229 Machete Crawl wheels  molded composite
construction  black in color  1.02' (26mm) wide  2.12' (53.9mm)
diameter  12mm hex
Tires: 1.9' Nitto Trail Grappler M/T  S30 compound with large blocks
for excellent bite in all terrain 4.7' (119.4mm) 1.9' (48.2mm)
Shocks: Coil over  oil filled  steel springs  white in color
Suspension: Optimized suspension geometry with integrated mounts
upper and lower aluminum links  4-link design reduces axle steer
and torque twist  and guards against suspension wrap-up in high-
power applications  all steel links
Steering: Proper CMS geometry using 3-link setup with panhard bar
45° steering angle
Bumpers: Scale front and rear bumpers and rock sliders licensed by
JCR Offroad  lenses in bumpers for light kit (light kit not
Warranty: One year bumper to bumper limited. Axial's warranty center
Hobby Services will repair or replace any incorrectly made part.
Proof of purchase is required for Axial to honor any warranty
claim. Axial reserves the right to change or modify this warranty
without notice. This warranty does not cover damages due to normal
wear and tear  users' failure to perform routine maintenance  user
error of assembly or installation  modifications  misuse  crash
damage  or the addition of aftermarket parts or optional parts.
Note: Purchasing products from unauthorized retailers may void the
warranty and prevent support and service.
Repair or replacement of the product by Hobby Services is the sole
and exclusive remedy for any loss or damages.

RTR SCX10 II Jeep Wrangler Unlimited CRC with Oil-Filled Shocks
Wheels  Tires  Painted Body  Rock Sliders  Radio  ESC  Motor
Decals. Waterproof Receiver Box  LED Lights and Instruction

Battery: 6-cell NiMH or 2-3S LiPo
Battery Charger: Compatible with selected battery
Building and track equipment

Length: 19.25' (489mm)
Width: 8.9' (226mm)
Height: 9.4' (223.4mm)
Wheelbase: 12.3' (312.4mm) adjustable with optional link kits sold
Ground Clearance: 3.0' (77mm)
Weight: 4.5lbs (2.04kg) approximately  with electronics
Optimized Gear Ratio: 3.75:1
Final Drive Ratio (FDR): 40.44  stock
(33.69-54.15 with different spur/pinion gear combinations  extra
spur and pinion gears must be purchased separately)
Length: 17.2' (438mm)
Width: 8' (203mm)
Height: 5.5' (140mm)

Related Items

Recently Viewed Items