The INDORFIN Race Drone

The INDORFIN Race Pack comes with everything you see here, including 130 mm race drone, 5.8GHz 4.3 inch color monitor, goggles, RISE J2000 2.4GHz transmitter, 3S LiPo battery, charger, prop guards, and full instructions.

group pic of everything included
Built on a light but rugged carbon fiber frame for ultimate speed and strength. 

carbon fiber frame
Quad 4100KV motors for maximum speeds in freestyle drone flying.

brushless motors

The included F3 Flight Controller comes loaded with Betaflight, an open-source flight software that allows you to customize your flight program or just pick up and fly!

F3 Flight Controller with Betaflight
The included, 600 TVL camera is adjustable to offset the tilt-forward of extreme speeds.

close-up view of camera
The Indorfin RTF comes with the 2.4GHz RISE J2000, the same transmitter included with the Vusion 250 and Houseracer models. It has already been linked to the Indorfin's built-in receiver

2.4GHz RISE J2000

Futaba, Tactic, Spektrum®, or nearly any other receiver can be used. Plug it into the RX port using RX 4-Pin Extension (RISE2141, not included). Use Betaflight to select your receiver. To reduce weight, remove the canopy and install your receiver on top of the Indorfin.
alternating view of various receivers from Futaba or Tactic in use


  • RISE0210
  • Diagonal Size: 130mm (5.1 in)
  • RTF Weight: 169 g (5.9 oz.

Race Pack Includes:

  • Carbon fiber frame for exceptional durability
  • Installed 5.8GHz FPV transmitter
  • F3 Flight Controller with Betaflight
  • 5.8GHz 4.3" color monitor
  • Monitor goggles
  • Rise J2000 2.4GHz hobby transmitter
  • 3S, 11.1V 740mAh 20C Onyx LiPo battery and charger
  • Extra props
  • Prop guards
  • Four AA batteries for transmitter
  • Full instructions

Receiver/Monitor Specifications:

  • Monitor: 4.3" (109 mm) color LCD
  • 5.8GHz Receiver: 5 bands (A, B, E, F and R); 40 channels
  • Antenna: RP-SMA 3dBi whip
  • Receiver Sensitivity: -90db
  • Screen Resolution: 480x272
  • Format: NTSC/PAL (auto-adjust)
  • Micro Memory Card Port: compatible with cards up to 32GB
  • Battery: 1S 3.7V 1400mAh LiPo battery
  • Operating Voltage: 3.6-5.5V
  • Run Time: 1.5 hours

FPV Camera Specifications:

  • Resolution: 600TVL
  • Input Voltage: 3.6-5.5V
  • Working Current: 550mA (5V) max.
  • Micro Memory Card Port: compatible with cards up to 32GB
  • External Video Quality: 640x480p VGA
  • Internal Video Quality: 1280x720p
  • 30 fps (when recorded from micro memory card)
  • Video Format: AVI
  • Photo Resolution: 2 MP
Products (Total Items: 4 )
Sort by:
INDORFIN 130 Brushless FPV Race Drone RTF 200mW
In Stock.
INDORFIN 130 Brushless FPV Race Drone FPV-R 200mW
In Stock.
Cable Set CC3D Flight Controller RISE2509
In Stock.
3S 11.1V 740mAh 20C XT30 Plug ONXP2126
In Stock.